Amplifiers

A power-packed, beautiful looking amp, but that’s not all that is pretty about the Marantz MM7055 5-channel power amplifier. This super monster is a powerful, sophisticated amplifier that shines at musical detail and volatile peaks.

With all the hype of “new and improved” amps, such as 7.2 and 9.2-channel surround sound systems, most home theater enthusiasts still prefer the tried and true 5.1-channel sound. Understanding this opportunity, Marantz built this 5-channel power amp. It is the primary companion to its AV7005 preamp.

Already decided on it?

It's not easy choosing an amp, but when you know, you know.

Top Features of Marantz MM7055 Reviewed

Every amp has its features, but what exactly are you getting with five channels of home theater horsepower?


With the Marantz MM7055, you won’t need to buy more channels than you need. It does, however, make it easy for you to add one or more MM7025 2 x 140 watt amplifiers to your overall set up. So, if you need more surround channels or multi-room audio, you can simply get everything you need with this bad boy.


The MM7055 is built to drive high-performance speakers. It can easily connect to a preamp or A/V processor that has XLR outputs, as it has XLR inputs. Once that setup is complete, you can enjoy the fascinating sound quality that can quite literally touch your heart.

How Much Power Does the Marantz MM7055 Possess?

We are going to cut right to the chase here, this 5-channel amp delivers immense power and detail. You’re looking at 140 watts per channel into 8 ohms.

Here’s the deal, we judge the amount of power by high flowing current, and that’s exactly what you get with this amp. It has 4-way binding post terminals so your connections are nice and snug. In addition, it is easy to set up, unlike some power amps.

If you want a thrilling home theater experience, or to juice up your music in your listening room to the next level, you can pair it with the AV7005 pre-amp/processor. For those audiophiles that are more advanced and have a bigger budget, you can also add one or more MM7025s.

One of the best power features we absolutely LOVE about this amp is that it has its own dedicated cooling unit. The worst thing you can do is get an amp that isn’t Eco friendly. That was one of our knocks on our Schiit Vidar power amp review. Efficiency is key, along with current.

Be careful going down the rabbit hole of “perfect sound.” You will be getting enough from this amp and a pre-amp. Sometimes simpler is better. With that being said, if you know what you’re doing and want to have a more complex system, there is room for expansion.


Marantz MM7055 Amplifier Pros and Cons

After testing this product and listening to audiophiles who have been verified buyers, we came up with this list of pros and cons. Our hope is that you get one step closer to selecting an amp that fits what you are looking for. Everyone is going to have their list of what they need their amp to do. Here’s to better sound!

Pros

  • ​Audiophile grade
  • ​8 ohms
  • ​Provides “full” sound
  • ​Delivers 140 Watts of High Current Power
  • Balanced XLR and RCA inputs
  • ​Nuances are super clear
  • Simple set up
  • Long-term power delivery into low impedance speakers
  • Sits on a “Thermal Tunnel” for efficient heat dissipation

Cons

  • ​For some, 5 channels may not be enough
  • Some people do not feel the “warmth”
  • ​Some customers love it, some don't - check out the alternatives that people go with if they don't love it

Conclusion:

As you can obviously tell, there are much more pros than cons. These are going off of real, verified purchases and reviews. For the price, you will get plenty of power output compared to higher end Amps

Comparable Amplifier Competition

There are some great alternatives out there that we want to compare for you, so you have a few options to choose from.

First, we’ll give what we believe is a very similar power amp and around the same price (give or take). Second, there will be power amps that are a few notches above and below in terms of capabilities, features and price. Lastly, we will provide you with our final verdict.

Cheaper Alternative

Outlaw Model 5000

Also a 5 channel amp and if you have speakers running on AVR power, this amp is fantastic. Can work well with 4 ohms or 8 ohms speakers. A great option and you can save some money if the MM7055 is out of your budget. We do, however, recommend the MM7055 over the Outlaw Model 5000 if you have the budget for it.

Similar Price Alternative

Emotiva Audio XPA-5

So many audiophiles compare the Marantz MM7055 vs Emotiva Audio XPA-5 for plenty of reasons. First, this amp also has 5 channels. Second, the price is a little more, but the efficiency and power is overall better than the Marantz MM7055 - in our humble opinion.

With the right receiver, this amp can really power your front three speakers and get the full amount of sound you’re looking for. Be willing to spend a tad bit more with this option.

Pricier Alternative

QSC PLD 4.5

This 2000 watt four channel power amplifier will knock you down a peg or two if you think you know sound produced by an amp. Simply amazing, words cannot describe how good this will feel when you hook your speakers up to the QSC PLD 4.5 and listen for the first time. Prepare to spend double the investment.


Final Thoughts

Finding an amp isn’t easy, even for audiophiles. However, focusing on the end result got us pumped up, excited and ready to pull the trigger because we absolutely knew power amps flat out create better sound. That’s what we were after - better, more powerful, articulate and beautiful sound.


At the end of the day, you should understand exactly what you want out of your amp. That’s half of the battle. If you can figure that out, all of these will make sense and you will be able to narrow down your decision.

In a world where high-end amps meet affordability, we spill our guts out on the Schitt Vidar review.

There’s nothing better than that sound of a high-end power amplifier hooked up to your favorite loudspeakers to enjoy a movie night, gaming day or just music in the air tonight. However, the grass isn’t always greener on the other side, which is why we want to show you the good, the bad and the ugly on the Schitt Vidar Intelligent Stereo / Mono Power Amplifier!

Coming in at $699 and a California based manufacturer, what Schitt promises you is an ultra-high-end amplifier, without the ultra-high-end price. Although there are some excellent features, which we want to highlight, we will lay it all on the line where you can decide to either go with the Vidar or some great alternatives.

this image shows the schiit vidar review of front panel

We Love the Look, Feel and Design

If you already decided on purchasing this product, use the button below to go to Schiits website to order. With that said, we urge you to keep reading because we break down what's great and what's not about the Vidar. There's also some REAL NICE alternatives that you can choose from, with amazing reviews and potentially an overall better bang for your buck.

If you don’t know much about audio equipment, buying a power amp is just the beginning expense. You will obviously need a good set of speakers to hook up, the right cables, and if you want to up the ante, you should get a pre amp. So, all together you could be looking at spending a little over $1,000, which most audiophiles would agree that just over $1,000 is a bargain for a 2 channel, class AB power amp.

Reviewing the Features of the Schiit Vidar Power Amplifier

The Vidar is a simple-looking all metal box power amp that has some ultra-high end features. First and foremost, power output and amplification type are the most important things about power amps. This product delivers class AB instead of class D. A/B amplification is preferred by most high-tech audiophiles because it produces cleaner sound and less distortion.

back panel of the schiit vidar

How Much Power Does it Possess?

With the class A/B amplification, it can output 100W of power per channel into 8 ohms or 200W into 4 ohms in stereo mode. Second, you can use the vidar in mono mode, and dual mono mode with two units. If you do this, it can output 400W per channel into 8 ohms.

There is no active cooling system, but all the produced heat is handled at the front and top panels. Obviously we would all love if it had a cooling system so it wouldn’t get so hot. On the flip side, without the cooling system, the power amp is much more efficient, and doesn’t produce the extra fan noise.

If you’re looking to save the environment, the vidar is NOT for you, as it will stay turned on as long as its plugged in. On a side note, these power amps are very eco-friendly. Going back to the vidar, there is no standby or auto-standby. Most class AB amps have auto-standby or standby buttons, but not the vidar.


Pros and Cons

After analyzing hundreds of customer reviews, we came up with a list of pros and cons. Check them out!

Pros

  • Extremeley simple design
  • USA (California) Made
  • Class A/B amplification
  • ​100W power output per channel, double power output into 4 ohms
  • ​Mono and stereo mode, which means 400W per channel into 8 ohms in mono mode

Cons

  • No volume controls
  • No standby mode​​​
  • Not many customers LOVE it, they would rather buy an alternative (keep scrolling down and you’ll see the list of similar power amps)
  • ​Not eco-friendly at all, which can result in damage to your speakers and the amp itself due to in-efficient running time (causing over-heating)

Conclusion:

While we think the vidar is a great value for the money and the features, our mission is to help you choose what fits your room best. For that reason, we want to show you a few schiit vidar alternatives, which will help make your decision much easier.

What Are the Best Alternatives?

There are some great alternative power amps that have most, if not more of the same specs. At $699 price point, it’s not easy to find grade AB amplification with the same kind of performance, manufacturing and expandability.

At this price tag, the best alternatives that match Vidar’s features and cost are the Marantz MM7025 Stereo Power Amplifier, the Parasound 2125v2 150 Watt Stereo Power Amplifier, and the Crown XLi3500. The price sometimes varies in the audio world, so you can always wait until it goes down again.

If you have a little bit bigger budget, there’s more options. If money isn’t an issue, your choices will increase significantly. With that being said, there are two power amps that are a step up in technology and sound, and they are the Emotiva XPA-2 Gen 3 and the Monoprice Monolith 2x. Check out the table below to get a better feel for the features and why they may be a better fit for your audio needs.

Alternatives

#1

Marantz MM7025 Stereo Power Amplifier

This power amp is priced very similarly and it offers just as much, if not more value just like we mentioned in the schiit vidar review. The features include both RCA and XLR inputs, DC trigger input / output, flasher input, 4-way posts and a remote control connector. The Marantz MM7025 has a power button, unlike the Vidar, which is eco-friendly, and flat out a better feature. On a friendly note, the manual says it’s not recommended to use this amp with 4 ohms speakers, so keep that in mind before buying.

#2

Parasound 2125v2

Another A/B power amp is the Parasound 2125v2, which is also a two-channel THX Ultra 2 power amplifier. Produces 150 watts per channel into an 8 ohms. The design is sleek and has a gold plated RCA input jacks and loop output jacks. Again, there is a standby mechanism (unlike the Vidar), channel status and heat indicators. The price is very similar, depending on the time of the year. Worst case you’re spending an extra $100, which isn’t bad at all.

#3

Crown XLi3500

What a beautiful, powerful, amazing two-channel, 1350W at 4Ω POWER amplifier! We get excited just talking about his beauty mainly because of the affordability and the terrific quality sound you’ll get. In our Klipsch RP-280F review, we mentioned that this amp is a phenomenal duo. The price point is very similar to the Vidar and has some serious features that any audiophile would be extremely proud of. Like the Schiit vidar, it has a balanced XLR and RCA inputs and binding post and speak on outputs. There is also an efficient forces air-cooling mechanism, which prevents excessive thermal buildup.

#4

Emotiva XPA-3 Gen3

This power amp is a little more pricey, but has some really amazing features. In addition to the features, it’s a power amplifier just over $1,000. 


Almost exactly the same as the Vidar, Emotiva’s XPA-2 features 5-way gold-plated speaker binding posts as well as balanced XLR and RCA inputs. Again, another class A/B amplification, but this bad boy has a class H power supply, which helps improve efficiency and gives clearer sound. Check out the customer reviews, they say it all:

customer reviews on schiit vidar alternative
#5

Monolith Multi-Channel Power Amplifier

This is another amp that is a little over $1000, but is every bit as powerful and terrific as the Vidar. Monoprice is also designed and engineered in the US, which is nice to know. The look and feel of the Monolith Multi-Channel is stunning, beautiful and every bit of elegant.


The features include both balanced XLR and unbalanced RCA inputs, 5 way binding posts, chassis ground and DC trigger input. There is a standby button (upgrade from Vidar) on the front panel and can be put on standby when you aren’t using it. This amp delivers the best in music and movie soundtracks that we all deserve to hear.


Final Thoughts

Is the Schiit Vidar the best power amp on the market today? Absolutely not. However, it is very good and it is made in the US. The problem that we have with it is it isn’t very eco friendly, causing it to not last as long as it should. There’s also the fact that you need to stack it up heavily with the correct pre-amp to get more juice out of it. We analyzed hundreds of reviews by customers and we believe it is better to go with one of the alternatives we suggested.